Polarstar Complete O-ring Set

PRODUCT DESCRIPTION

Kits Include:

Jack:

1x M1.5 x 6.5 (Buna 70) - Front Outside of Nozzle
2x M1.5 x 9.5 (Buna 70) - Rear Outside of Nozzle
1x M1.5 x 19.5 (Buna 70) - Thread Relief of Front Cylinder
1x M1.0 x 18.5 (Buna 70) - Captured Between Front Cylinder and Donut
3x M1.0 x 5.0 (Buna 70) - Two on Nozzle Stem & One Inside of Nozzle
1x M1.0 x 2.5 (Buna 70) - Plug screw on bottom
1x M1.0 x 4.5 (Buna 70) - Barb Fitting

Kythera:

1x M1.0x16.0 (Buna 70) - Rear Cylinder ID, Front (#5)
1x M1.0x3.0 (Buna 70) - Barb Fitting (#6)
1x M1.5x13.0 (Buna 70) - Nozzle OD, Front (#7)
1x M1.5x15.0 (Buna 70) - Nozzle OD, Rear (#8)
1x M1.5x20.0 (Buna 70) - Rear Cylinder ID, Rear (#9)
2x M1.5x4.0 (Buna 70) - Spool Tail (#10)
2x M1.5x6.0 (Buna 70) - Spool Front (#11)
1x M1.5x7.0 (Buna 70) - Nozzle ID (#12)

F2:

1x M1.5 x 10.0 (Buna 70) - Outside of Nozzle
1x M1.0 x 5.5 (Buna 70) - Inside of Nozzle
1x M1.5 x 7.5 (Buna 70) - Inside Front Cylinder
1x M1.0 x 2.5 (Buna 70) - Inside Rear Cylinder
1x M2.0 x 9.0 (Buna 70) - Inside Sleeve
2x M1.0 x 19.0 (Buna 70) - Outside Sleeve
1x 010 (Buna 70) - Front Poppet
1x M1.5 x 6.0 (Buna 70) - Rear Poppet
1x M1.0 x 4.5 (Buna 70) - Barb Fitting

Fusion:

(All o-rings are 70 durometer with the exception of the poppet base which is 90 durometer.)

1x 011 (Buna 90) - Poppet Base
1x 015-70 (Buna 70) - Poppet Sail (Prior to July 2015)
1x M2.0 x 19.0 (Buna 70) - Poppet Retainer, Rev0
2x M1.5 x 15.0 (Buna 70) - Poppet Sail / Poppet Seat, R02A
1x 011 (Buna 70) - Center Cylinder / Poppet Seat ID
1x 013 (Buna 70) - Front Cylinder
4x M1.0 x 2.5 (Buna 70) - Manifold
1x 014 (Buna 70) - Nozzle OD
1x M1.5 x 7.0 (Buna 70) - Nozzle ID

Micro Regulator:

2x M1.5 x 4.5 (Buna 70) - Body ID
1x M2.0 x 14.0 (Buna 70) - Piston OD
1x Base Seal